- How many bags of concrete do I need for a post footing?
- Is 2 feet deep enough for fence posts?
- How do you keep fence posts from rotting in concrete?
- How long will a treated 4×4 post last in the ground?
- How tall can you make a privacy fence?
- How long does it take for concrete to set for a fence post?
- Should fence posts be set in concrete?
- How long does it take 4 inches of concrete to dry?
- What size posts do I need for a 6ft fence?
- How many square feet does a 80lb bag of concrete cover?
- How many posts will a bag of Postcrete do?
- Can you mix Postcrete in a bucket?
- How do you estimate concrete?
- Will fence posts rot in concrete?
- How deep should post be for 8 foot fence?
- Should I use 4×4 or 6×6 fence posts?
- How many bags of concrete do I need calculator?
- Is quikrete as strong as regular concrete?
- How long does Postcrete take to fully cure?
- How many bags of concrete do I need for a 4×4 pad?
- Why do fence posts rot at ground level?
How many bags of concrete do I need for a post footing?
45 cubic feet of concrete when mixed with 2.5 quarts of water.
In order to have enough concrete for 1 cubic yard (27 cubic feet), you’ll require 2.2 bags of 60-lb concrete.
Since bags are only sold in whole (not half, or quarter) quantities, you’ll need to purchase three (3) 60-lb.
bags for one cubic yard..
Is 2 feet deep enough for fence posts?
You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.
How do you keep fence posts from rotting in concrete?
The ideal solution is to eliminate contact between soil and wood. Using a metal post anchor set in concrete is probably the most effective method for achieving maximum longevity. To help keep the post from wicking water, choose an anchor that spaces the post bottom away from the concrete.
How long will a treated 4×4 post last in the ground?
If you find the RV posts I mentioned earlier, they are steel, treated and when put in concrete will last 25 years or more. It will not last long (7 yrs max) if the bottom of the post is wet. If you place stone at the base of the post, it should last 20+ yrs.
How tall can you make a privacy fence?
Fence regulations are typically governed by local law or a homeowners’ association. In many municipalities, six feet is the maximum height for a backyard fence, while a 4-foot fence may be used in front of your home.
How long does it take for concrete to set for a fence post?
20 to 40 minutesThe concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.
Should fence posts be set in concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
How long does it take 4 inches of concrete to dry?
Concrete typically takes 24 to 48 hours to dry enough for you to walk or drive on it. However, concrete drying is a continuous and fluid event, and usually reaches its full effective strength after about 28 days.
What size posts do I need for a 6ft fence?
If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.
How many square feet does a 80lb bag of concrete cover?
45 cubic feet and an 80-pound bag yields . 60 cubic feet. One 50-pound bag of Quikrete Fast Setting Concrete Mix yields about .
How many posts will a bag of Postcrete do?
“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed. The instructions are on the bag.”
Can you mix Postcrete in a bucket?
You can buy instant concrete you just go over with a watering can, only you’ll have to build it up in layers potentially not quite as strong, but should still work. Dig hole, pour in bucket of water, pour in bag of postcrete. No mixing.
How do you estimate concrete?
Multiply the width times the length times the height (W x L x H). You can also use our volume calculator to find cubic yardage of a space. Convert the volume to cubic yards from cubic feet. To do so, divide the cubic footage by 27 to get the yards of concrete needed.
Will fence posts rot in concrete?
A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
How deep should post be for 8 foot fence?
The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.
Should I use 4×4 or 6×6 fence posts?
Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.
How many bags of concrete do I need calculator?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.
Is quikrete as strong as regular concrete?
Quikrete Fast-Setting Concrete Mix is easy to use — just add water — and it sets in 20 to 40 minutes. … That’s stronger than the concrete used for foundations on most homes.
How long does Postcrete take to fully cure?
10 minutesA ready to use blend of selected sand, cement and additives formulated for fixing wooden, concrete and metal posts. With just the addition of water and with no mixing required; Postcrete sets in 10 minutes and comes in handy 20kg weatherproof, tear resistant plastic bags.
How many bags of concrete do I need for a 4×4 pad?
Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)
Why do fence posts rot at ground level?
The main cause is the wood having prolonged exposure to moisture in soil which means fence posts decay at ground level – just above the concrete base. This means the post will still be solid below and above the damaged area. Insect infestations can also cause rotting in wooden fence posts.